How to sharpen d2 blade?
Share
For many people, carrying an EDC knife is indeed crucial. EDC knives serve various purposes, from everyday tasks like opening packages or cutting fruits to emergency situations where having a sharp tool can be essential for safety and survival.
After long time use, a folding knife typically needs to be sharpened when it starts to lose its edge and becomes difficult to cut with. Signs that your knife needs sharpening include:
- Difficulty cutting through materials that it used to slice effortlessly.
- Noticing visible nicks or chips along the blade edge.
- Feeling a rough or jagged edge when running your finger lightly along the blade.
- Seeing light reflecting differently off the edge compared to when it was sharp.
Regular maintenance can help prolong the time between sharpenings. Using a honing steel or ceramic rod to realign the edge between uses can extend the time before a full sharpening is necessary. How often you need to sharpen your folding knife depends on how frequently you use it and what you use it for.
So it is necessary to know how to sharpen the blade.
But blades made of different materials have very different sharpening methods, since D2 is widely used in most folding knives, now let’s introduce how to sharpen D2 knives.
D2 steel is often considered an ideal choice for knife making due to its Excellent Edge Retention,High Hardness,Toughness,Corrosion Resistance.Despite its high hardness, D2 steel is still relatively easy to sharpen compared to some other high-end steels.
Here's a basic guide on how to sharpen a D2 blade:
- Gather Your Tools: You'll need a sharpening stone or system. For D2 steel, a diamond sharpening stone or a ceramic stone is recommended due to its hardness. Additionally, you may want a honing rod or strop for fine-tuning the edge.
- Angle Guide: Determine the angle at which your knife is sharpened. This is usually between 15 to 20 degrees per side for most knives. You can use a sharpening guide to maintain a consistent angle.
- Prepare the Stone: If you're using a water stone, soak it in water for the recommended time. If using oil or diamond stones, no soaking is necessary.
- Start Sharpening: Hold the knife at the chosen angle against the stone. Starting from the base of the blade, move it towards the tip in a sweeping motion, maintaining consistent pressure. Repeat this motion several times on each side of the blade, ensuring you sharpen the entire length evenly.
- Burrs and Edge Alignment: As you sharpen, you'll form a burr (a small flap of metal) along the edge. Once you feel a burr along the entire length of the blade on one side, switch to the other side and repeat the sharpening process until you form a burr there too.
- Refining the Edge: Once you've formed a burr on both sides, it's time to refine the edge. Reduce pressure and make lighter strokes on each side to remove the burr and achieve a sharp, clean edge.
- Honing and Stropping: After sharpening, you can use a honing rod or strop to further refine the edge and remove any remaining burrs. Stropping helps polish the edge, making it even sharper.
- Test the Sharpness: Carefully test the sharpness of your blade. You can do this by gently slicing through a piece of paper or shaving a small amount of hair from your arm.
- Maintenance: Regularly hone and strop your blade to maintain its sharpness. Depending on usage, you may need to sharpen it again periodically.
Remember to take your time and practice patience when sharpening your D2 blade. It may take some trial and error to find the right technique and achieve the desired level of sharpness.